Brother BAS-311F-0 - Deleting a Part of the Program During Programming; Moving a Part of Continuous Program in Parallel

Programmer 159
Chapter 3 Programming with Command Function
Deleting a part of the program during programming
A program can be modified during programming. The
example in the left is used for explanation of deleting 2
stitches at 8 and creating a new program.
1. Press
.
2. Input the number of stitches to be deleted and
press
.
The example is deleting 2 stitches backward.
Press
.
3. The needle point moves to 6.
4. Continue programming.
Moving a part of continuous program in parallel
A part of continuous program is moved in parallel. The
example in the left is used for explanation of moving patterns
B an C in parallel.
Calling data
1. Specify the program number on the operation
panel and press the read/write switch to read
the data.