Programmer 199
Chapter 4 Extended Option Output
Setting enabling conditions
If setting is not made, the status is always enable. To carry out setting as per the extended option
output conditions, do not set enabling conditions.
Items to be set are as follows:
Extended option output number Specify a number out of 1 - 16.
Refer to "Table of extended option output"
(Refer to page 207.)
Enabling conditions 3 numbers of enabling conditions can be input.
Refer to "Table of condition number" (Refer to page 203.)
Disabling conditions 3 numbers of disabling conditions can be input.
Refer to "Table of condition number" (Refer to page 203.)
When setting is complete, be sure to press .
To cancel the set value, input and press .
Extended option output No.
Enabling condition
Disabling condition
To Next Page
Loading...
