Programmer 27
Chapter 2 Programming with Help Function
Magnified input
To program a detailed pattern for each stitch, use a magnified
input. The example in the left is used for explanation of
programming the pattern to the magnification of 5.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Select with and press .
3. Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select with and press .
5. Select
and press .
6. Move the work clamp with
. Press
when the needle point is at point B of the pattern.
7. Repeat step 6 and create the program to point
D.
8. When point D is programmed, press
twice.
To Next Page
Loading...
