52 Programmer
Chapter 2 Programming with Help Function
Example of modified program
This section describes the modification method of the program using examples. Refer to
"Programming" (page 85) or "Checking the program setting and setting attribute" (page 109) for
function and operation of each icon.
Resizing pattern
The programmed pattern is resized. The example in the left is
used for explanation.
The center point (reference point) of resizing can be changed. The magnifying direction varies
depending on the position of the reference point.
If the reference point is not determined, the pattern is resized to the home position.
If the reference point is determined, the pattern is resized to the reference point.
Calling data
1. Press .
The work clamp moves to the home position. The
programmer screen is displayed.
To Next Page
Loading...
