Programmer 53
Chapter 2 Programming with Help Function
2. Select with and press .
3. Select
with and press .
4. Input the data number and press
.
5. Press
.
Resizing
1. Select with and press .
2. Select
with and press .
3. Input the resizing percentage for the X and the
Y axes.
150% is input in the example.
To magnify the pattern by 150%, input 150.
4. Input the stitch length and press .
If the stitch length is 0.0, the pattern is resized
with the same number of stitches as the original
data.
5. Move the needle to the reference point of
resizing with
.
If the needle is not moved, the pattern is resized to
the home position.
6. Press .
Calculation is made. The pattern is resized.
To Next Page
Loading...
Need help?
General
