116 Programmer
Chapter 2 Programming with Help Function
3. Input the number of the feed boundaries to be ignored and press .
Inputting 99 ignores all boundaries.
4. Use to change the reference position for resizing.
If no reference position is specified, the home position is used as the reference.
5. Press .
The copied data is added as split data.
If or is selected
1. Input the angle of rotation and press .
2. Adjust the reference position for rotation with , then press .
Resizing scale in the X axis direction
Resizing scale in the Y axis direction
Stitch length
Reference position
To Next Page
Loading...
Need help?
General
