Programmer 217
Chapter 5 Reading/Writing Data
Checking the image display (go to 7 when not checking)
4. Press and select .
5. Press to turn on.
Press to turn off again.
6. Press .
An image is displayed. This is the image from data saved in a floppy disk, not the image currently in
editing. Press
or to return to the submenu.
7. Press to read the data.
To cancel reading, press .
OFF is highlighted if selected.
Displays the stitch count.
Displays the lateral length.
Displays the longitudinal length.
Press to display the overall sewing data.
Press
to display the overall view of the data.
To Next Page
Loading...
