Programmer 23
Chapter 2 Programming with Help Function
Creating feed data
Creating basting data
Creating split data
Creating magnified data
Inputting data (×2)
Inputting data (×5)
Inputting data (×10)
Carrying out double stitch
Creating double stitch data in the reverse direction to the left side of the sewing path
Creating double stitch data in the reverse direction to the right side of the sewing path
Creating double stitch data in the same direction to the left side of the sewing path
Creating double stitch data in the same direction to the right side of the sewing path
Offsetting double stitch data to the left side of the sewing path
Offsetting double stitch data to the right side of the sewing path
Displaying the data image during editing
Checking the program setting and setting attribute
Editing the current data
Moving a pattern in parallel by feeding
Moving a pattern in parallel by sewing with the specified pitch
Moving a pattern in parallel
Moving a part of pattern in parallel
Repeated copying
Copying a pattern symmetrically to the Y axis
Copying a pattern symmetrically to the X axis
Copying a pattern symmetrically to a point
Copying a pattern turnover
To Next Page
Loading...
Need help?
General
