Programmer 49
Chapter 2 Programming with Help Function
Creating a stitch pattern
1. Create a pattern in consideration of the most
inside and outside lines for a multiple stitch.
The two lines should be spaced uniformly.
2. Connect each direction change point on the
inside line with the matched direction change
point on the outside line using a line.
3. Provide one point (or more points) between the
above two direction change points, and connect
them using a line.
Follow the procedure for curve points specification.
Specify points in pairs on the inside and outside
lines. The lines should be spaced uniformly.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
Should be spaced
uniformly.
Outside line
Inside line
28
27
26
25
24
23
22
2120
19
18
1
2
3
45
6
789
10
11
12
13
14 15
16
17
34
33
3231
30
29
To Next Page
Loading...
