Brother BAS-311F-0 - Page 61

60 Programmer
Chapter 2 Programming with Help Function
3. Select with and press .
4. Input the data number and press
.
5. Press
.
Moving to position 1
1. Select with and press .
2. Press
and press .
The work clamp moves to the sewing start
position.
3. Press .
Programming a new point
1. Select with and press .
2. Move the work clamp with
. Press
when the needle point is at 1'.
1' is programmed.
3. Press .
Deleting 1
1. Select with and press .
2. Press
and press .
The work clamp moves to the sewing start position.