Brother BAS-311F-0 - Page 70

Programmer 69
Chapter 2 Programming with Help Function
Programming a new point
1. Select with and press .
2. Move the work clamp with
. Press
when the needle point is at B.
B is programmed.
3. Press .
Deleting 1
1. Select with and press .
2. Press
and press .
The work clamp moves to the sewing start position.
3. Press .
4. Select
with and press .
5. Input the number of stitches to be deleted and
press
.
The example is deleting 1 stitch. Press .
6. The needle point moves to B.
7. Press
twice.