Brother PE-Design Next - Page 147

145
Creating Embroidery Patterns Using Images
Tutorial 7: Print and Stitch
Check the image position.
If any part of the image extends out of the print
area, drag the image to adjust its position.
Click OK.
Click Print.
Specify the appropriate settings in the Print
dialog box, and then click OK.
c
“Printing” on page 82.
 Printing begins.
Step 3 Printing the positioning
sheet
Print a sheet for aligning the image and the
embroidery.
Specify the print settings.
(1) Under Paper and Orientation, select the
appropriate settings for the paper to be
printed on.
(2) Select Print a sheet of paper for
aligning the printed image and the
embroidery.
Click Print.
Specify the appropriate settings in the Print
dialog box, and then click OK.
c
“Printing” on page 82.
 Printing begins.
b Memo:
To check the print image, click Print Preview .
b Memo:
For details on printing on iron-on transfer
sheets or printable fabric, refer to the
instructions for the iron-on transfer sheets and
printable fabric.
4
5
6
7
b Memo:
To check the print image, click Print Preview .
1
(1)
(2)
2
3
XE8656-001.book Page 145 Monday, May 24, 2010 5:44 PM