Brother PE-Design Next - Page 252

250
Basic Font Creator Operations
Click , then .
And then click points 27 though 29.
Click , then .
And then click points 30 though 34.
Click , then .
Next, click points 35 though 44, and then
double-click point 45 (end point), or click point
45 and press the key.
Click 1, then drag Set Line to adjust the
character width.
Step 4 Save the font character
pattern
Click 1, then 2.
Select the MyFont folder at the following
location.
For example, (Drive where PE-DESIGN was
installed)\Program Files (Program Files
(x86))\Brother\PE-DESIGN NEXT\MyFont.
And then type in the file name. For this
example, type in the name “My font 1”.
Click Save.
7
27
28
29
8
34
33
32
31
30
9
Enter
35
37
36
39
38
41
40
43
4544
42
10
1
Set Line
1
2
1
2
font.fm Page 250 Thursday, May 27, 2010 8:27 PM