Burkert 8792 - Description of the PROFIBUS DP

185
PROFIBUS DP
28. DESCRIPTION OF THE PROFIBUS DP
28.1. Technical data
The protocol sequence complies with the standard DIN 19245 Part 3.
GSD file BUER0C1E.gsd
Bitmap files BUER0C1E.bmp
PNO-ID 0C1E Hex
Baud rate Max. 12 mbaud
(is automatically set by the Type 8792/8793)
Sync and Freeze mode Are not supported
Diagnosis telegram No device-specific diagnosis
Parameter telegram No user parameters
The process data is configured in the Type 8792/8793 and in the PROFIBUS master.
Maximum 10 process values (total INPUT and OUTPUT) can be transferred.
28.2. Interfaces
Input for process
actual value*
4 – 20 mA
frequency
Pt 100
Binary input
24 V DC
Type 8792/8793
PROFIBUS DP
2 binary outputs
24 V PNP
Initiator 1 / Initiator 2
24 V PNP NO
Inputs Outputs
Supply
Operation
Note:
Optional inputs and outputs are illustrated by dotted lines
Bus
Bus
* only for process controller Type 8793
Figure 115: Interfaces PROFIBUS DP
english
Type 8792, 8793