21
Description of System
Configurable auxiliary functions Effect
Setting display
EXTRAS
Adjustment of the display of the process level
SERVICE
For internal use only
POS.SENSOR
Setting interface remote position sensor (available for
Type 8793 Remote only. See chapter “5.2.3. Typ 8793,
Remote-Design”.
Simulation software
SIMULATION
For simulation of the device functions
DIAGNOSE (Option)
Monitoring of processes
Table 3: Positioner software. Configurable auxiliary functions
Hierarchical operating concept for easy operation on the following operating levels
Process level On the process level switch between AUTOMATIC mode
and MANUAL mode.
Setting level On the setting level specify certain basic functions during
start-up and, if required, configure additional functions
Table 4: The positioner software. Hierarchical operating concept.
To Next Page
Loading...
