Canon MF418x - Page 109

<Entry Tone>
Conrmation sound each time a key on the
operation panel or button on the display is
pressed
Select <On> (produce a tone) or
<Off> (not produce a tone).
<Invalid Entry Tone>
Sound produced when an invalid key operation
is performed, such as when you enter a
number outside the valid setting range
<Restock Supplies Tone>
Sound produced when a toner cartridge is
almost empty
<Warning Tone>
Sound produced when a paper jam or other
error occurs
<Job Done Tone>
Sound produced when an operation such as
copying or scanning is complete
<Energy Saver Alert>
Sound produced when the machine enters or
exits sleep mode
<Original in Feeder Detection Tone>
Sound produced when an original is loaded in
the feeder
*
Displayed only for MF419x / MF416dw
4
Use / to set volume, tap <Apply>.
● Tap and move the cursor all the way to the left to mute the sound.
For sound to be produced only when an error has occurred
Tap <Only When Err.> <On> <Apply>.
Basic Operations
100