Canon MF418x - Specifying Previously Used Destinations

Specifying Previously Used Destinations
0UWX-02R
You can select a destination from among the past three destinations. When you
specify a previously used destination, the machine also sets the same fax settings
such as density you used the last time you sent documents to that destination.
● When <Restrict Resending from Log> is set to <On>, you cannot use this feature. Disabling Use of
Previously Used Destinations(P. 560)
● Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and
disables this feature.
Limiting Available Destinations(P. 558)
● The destinations in Manual Sending are not available for this feature. Making a Call before Sending
Faxes (Manual Sending)(P. 184)
● When you specify a destination using this feature, any destinations that you have already specied are
deleted.
1
Press and tap <Fax>.
● When the logon screen appears, use the numeric keys to enter the user name and password. Then select the
authentication server and press . Logging on to Authorized Send(P. 45)
2
Select <Destination> <Recall Set.>.
3
Select a destination.
Faxing
159