Canon MF418x - Auto Detect

<Menu> <Network Settings> <SNMP Settings> <Acquire Printer Management Information
from Host> Select <Off> or <On> Restart the machine
Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan
Utility and when browsing or specifying the machine settings over the network.
Off
On
<Menu> <Network Settings> <Dedicated Port Settings> Select <Off> or <On> Restart the
machine
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Setting a
Wait Time for Connecting to a Network(P. 487)
0 to 300 (sec.)
Ethernet Driver Settings
Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/
full-duplex). You can also view the MAC address for wired LAN.
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MAC Address for Wired LAN(P. 446)
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conguring Ethernet Settings(P. 484)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
1000BASE-T
On
Setting Menu List
639