Canon MF418x - Specifying Registered Destinations

Specifying Registered Destinations
0UWX-02J
You can specify destinations by selecting them from the Address Book or coded dial numbers, as well as by using the
numeric keys. To use the Address Book or coded dial numbers, you need to register destinations beforehand. You can
also specify previously used destinations. If your oce has an LDAP server installed, you can also specify a destination
using user information in the server.
Specifying from Address
Book(P. 154)
Selecting Destinations Directly
by Entering Coded Dial
Numbers(P. 156)
Specifying Previously Used
Destinations(P. 159)
Specifying Destinations in an
LDAP Server(P. 162)
TIPS for Enhancing Security
● If you want to limit available destinations to ones from the Address Book, ones in an LDAP server, or
previously specied ones: Limiting Available Destinations(P. 558)
● If you want to disable specifying previously used destinations:
Disabling Use of Previously Used
Destinations(P. 560)
LINKS
Sending Faxes (MF419x / MF416dw)(P. 149)
Registering in the Address Book(P. 78)
Registering LDAP Servers(P. 499)
Faxing
153