Canon MF418x - Configuring SNTP

Conguring SNTP
0UWX-08H
Simple Network Time Protocol (SNTP) enables you to adjust the system clock by
using the time server on the network. The protocol is typically used for synchronizing
the machine and a server, such as when the machine needs to access an LDAP server
with the security authentication that was enabled. The time is adjusted based on
Coordinated Universal Time (UTC), so specify the time zone setting before
conguring SNTP ( Date/Time Settings(P. 645) ). SNTP settings can be specied
via the Remote UI.
● The SNTP of the machine supports both NTP (version 3) and SNTP (versions 3 and 4) servers.
1
Start the Remote UI and log on in System Manager Mode. Starting Remote
UI(P. 606)
2
Click [Settings/Registration].
3
Click [Network Settings] [TCP/IP Settings].
Network
505