Canon MF418x - Adjusting the Volume

Adjusting the Volume
0UWX-01C
The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or
error occurs. You can set the volume of each of these sounds individually.
◼ Adjusting <Fax Volume>
1
Press the ( ) key.
2
To change <Fax Volume>, tap / , and tap <Apply>.
● You can also adjust the volume by icking the slider.
● Tap and move the cursor all the way to the left to mute the sound.
◼
Adjusting <Other Volume>
1
Press ( ) key.
2
For MF419x / MF416dw, tap <Other Volume>.
3
Select a setting.
Setting Description Procedure
<Ring Tone>
*
Sound produced when an incoming fax is
received
Go to step 4.
<TX Done Tone>
*
Sound produced when fax sending is complete
<RX Done Tone>
*
Sound produced when fax receiving is
complete
<Scanning Done Tone>
*
Sound produced when fax document scanning
is complete
Basic Operations
99