Canon MF418x - Page 343

2
Tap <Finish>.
➠ The scanned data is saved in the USB memory device.
How the folders to save scanned data and les are named
● When scanning is complete, a folder is automatically created in the USB memory device to save the
scanned data. Folders and les are named as follows.
Folder
Name
The "SCAN_00" folder is created and up to 100 les are saved in the folder. The folders
"SCAN_01" to "SCAN_99" are then created when the current folder becomes full of 100 les.
File
Name
File names from "SCAN0000.XXX" to "SCAN9999.XXX" are given to the scanned data les ("XXX"
is the extension for the le format such as "JPG"). For the rst two numerical digits, the same
number is allotted as that of the folder number in which the les are saved. For example, The
fth JPEG le stored in the "SCAN_01" folder is named "SCAN0105.JPG".
7
Tap <Close>.
8
Disconnect the USB memory device from the USB port.
1
Press .
2
Press .
3
Tap <Device Status>.
4
Tap <Remove Memory Media>.
➠ Wait until the message <The memory media can be safely removed.> is displayed.
5
Disconnect the USB memory device.
● If you always want to scan with the same settings: Changing Default Settings(P. 131)
Using the Machine as a Scanner
334