Canon MF418x - Page 582

Using the operation panel
● You can also enable or disable TLS encrypted communication from <Menu> in the Home screen. Use
TLS(P. 709)
Starting the Remote UI with TLS
● If you try to start the Remote UI when TLS is enabled, a security alert may be displayed regarding the
security certicate. In this case, check that the correct URL is entered in the address eld, and then proceed
to display the Remote UI screen. Starting Remote UI(P. 606)
Enabling TLS for e-mailing/I-Faxing
● If the SMTP server and the POP3 server support TLS, you can enable TLS for communication with these
servers (
Conguring E-Mail/I-Fax Communication Settings(P. 469) ). For more information about the
SMTP server and the POP3 server, contact your Internet service provider or Network Administrator.
LINKS
Generating Key Pairs(P. 590)
Using CA-issued Key Pairs and Digital Certicates(P. 598)
Conguring IPSec Settings(P. 574)
Conguring IEEE 802.1X Authentication(P. 583)
Monitoring and Controlling the Machine with SNMP(P. 508)
Registering LDAP Servers(P. 499)
Security
573