Canon MF418x - Page 704

Grayscale Conversion
You can select ways to convert color values to a grayscale value when you print color print data.
sRGB
NTSC
Uniform RGB
● This section describes the settings to convert the color data into grayscale data.
● This setting is invalid for black-and-white data.
<Menu> <Printer Settings> <PS> <Grayscale Conversion> Specify the grayscale conversion
PDF
You can change settings for PDF les.
Enlarge/Reduce to Fit Paper Size
Specify whether to print in an enlarged/reduced size to t to the Printable Area(P. 860) of the paper. Note
that size enlargement/reduction will not affect the aspect ratio of the document.
Off
On
<Menu> <Printer Settings> <PDF> <Enlarge/Reduce to Fit Paper Size> Select <Off> or
<On>
Enlarge Print Area
Specify whether to enlarge the Printable Area(P. 860) as much as the paper size permits.
Off
On
<Menu> <Printer Settings> <PDF> <Enlarge Print Area> Select <Off> or <On>
Setting Menu List
695