Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
To change the setting, tap Settings.
◦ Enable/disable Wi-Fi◦
Select Enable to wirelessly connect via wireless router.
◦ Wi-Fi setup◦
Select how to setup Wi-Fi.
▪ Easy wireless connect▪
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
▪ Manual connect▪
Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
▪ WPS (Push button method)▪
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected
Setup (WPS) push button method. Follow the on-screen instructions during setup.
▪ Other connection types▪
▪ Advanced setup▪
Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.
▪ WPS (PIN code method)▪
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Note
• By tapping Advanced, you can set LAN in detail.•
For the items that can be set, see the following.
Advanced
• Wireless Direct•
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items Setting
Connection Enable / Disable
Network name (SSID) DIRECT-XXXX-TX-NNNN※1
Password XXXXXXXXXX (10 characters)
243
To Next Page