Cisco 7925G Administration Guide

Description or indicatorInformation
Information may be displayed in the following way:
•
Pink background: If AP is on the same channel as the best AP.
Being on the same channel as the best AP might indicate a
problem with the channel re-use pattern, particularly if the
percentage of time the AP is an immediate neighbor is relatively
high compared with other immediate neighbors.
Note
•
Asterisk (*): Not an immediate neighbor.
Information displayed in cell (for example, 27%-61/-39):
•
Percentage of time the AP is the immediate neighbor of the best AP.
•
RSSI range during the time the AP is the immediate neighbor.
Immediate Neighbor
The following table lists the information that is provided in the AP details report.
Table 25: AP Details Report
DescriptionField
Name of the AP if it is CCX-compliant; otherwise, the MAC address
is displayed here.
AP
MAC address of the AP.MAC
Number of sweeps where this AP has been observed.Observation Count
The last channel and frequency where this AP was observed.Channel - Frequency
A two-digit country code. Country information might not be displayed
if the country information element (IE) is not present in the beacon.
Country
Number of time units between beacons. A time unit is 1.024 ms.Beacon Interval
Every nth beacon is a delivery traffic indication message (DTIM) period.
After each DTIM beacon, the AP sends any broadcast or multicast
packets that may have been queued for power-save devices.
DTIM Period
The entire RSSI range in which this AP has been observed.RSSI Range [Lo Hi]
The Basic Service Set (BSS) Lost Count increments when the phone
passes a threshold number of missed beacons. Missed beacons identify
synchronization problems.
BSS Lost Count
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
111
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Site Survey Report

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g