EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
For more information, see...DescriptionNetwork setting
Wireless LAN Security, on page
80
The type of authentication that the phone
uses to access the WLAN. Options are:
Open
Access to all APs without WEP key
authentication/encryption.
Open+WEP
Access to all APS and authentication
through WEP keys at the local AP.
Shared Key+WEP
Shared key authentication through
WEP keys at the local AP.
LEAP
Exchanges a username and
cryptographically secure password
with a RADIUS server in the
network (Cisco proprietary version
of EAP).
EAP-FAST
Exchanges a username and
cryptographically secure password
with a RADIUS server in the
network.
EAP-TLS
Uses a dynamic session-based key
derived from the client adapter and
RADIUS server to encrypt data. Uses
a client certificate for authentication.
PEAP
This method uses name and
password authentication based on
Microsoft MSCHAP V2
authentication.
Auto (AKM)
Phone selects the AP and type of key
management scheme, either WPA,
WPA2, WPA-PSK, WPA2-PSK, or
CCKM that must use a wireless
domain server (WDS).
Security Mode
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
125
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
WLAN Configuration Settings

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals