Cisco 7925G Administration Guide

DescriptionChapter
Provides a conceptual overview and description of the Cisco Unified
Wireless IP Phone 7925G, 7925G-EX, and 7926G and provides an
overview of the tasks required prior to installation
Cisco Unified Wireless IP Phone, on
page 1
Describes how the IP Phone interacts with other key IP telephony
and wireless network protocols and components
VoIP Wireless Network, on page 23
Describes how to properly and safely install and configure the Cisco
Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G on your
network
Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G Setup,
on page 47
Describes how to use the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G web pages for initial phone configuration
and to update configuration files for the wireless IP phone
Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G Web
Pages, on page 67
Describes how to configure network profiles and phone settings, by
using the Settings menu on the wireless IP phone
Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G
Settings, on page 115
Describes how to use the Configuration Utility on the Wavelink
Avalanche server for updating the phone configuration
Wavelink Avalanche Server, on page
133
Provides an overview of procedures for configuring telephony
features and adding users to Cisco Unified Communications Manager
Features, Templates, Services, and
Users, on page 147
Explains how to view phone security, device, and network
information and network and call statistics from the wireless IP
phone
Security, Device, Model, Status, and
Call Statistics Information, on page
175
Explains how to obtain status information about the phone using
the phone web page
Remote Monitoring, on page 195
Provides tips for troubleshooting the wireless IP phoneTroubleshooting, on page 209
Provides suggestions for setting up a website for providing users
with important information about their wireless IP phone
Internal Support Website, on page 231
Provides information about setting up phones in non-English
environments
International User Support, on page
235
Provides technical specifications of the Cisco Unified Wireless IP
Phone 7925G, 7925G-EX, and 7926G
Technical Specifications, on page 237
Provides a detailed checklist for deploying the Cisco Unified
Wireless IP Phone 7925G, 7925G-EX, and 7926G
Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G
Deployment Overview, on page 241
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
xvi
Preface
Organization

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g