Cisco 7925G - Page 219

DescriptionItem
Identifies the default gateway or disables SRST.SRST Reference Option
The amount of time that the IP phone monitors its connection to Cisco Unified
Communications Manager before it unregisters from SRST and reregisters to
Cisco Unified Communications Manager.
Connection Monitor
Duration
MLPP Information
Identifies the MLPP Domain that is assigned to the phone.MLPP Domain ID
Indicates whether the phone uses special precedence rings and tones.MLPP Indication Status
Identifies call preemption capability set for this phone.
Forceful
The phone allows higher priority calls to preempt lower priority calls.
Disabled
The phone does not preempt lower priority calls with higher priority
calls.
Default
The phone uses the device pool setting.
Preemption
QoS Information
Differentiated Services Code Point (DSCP) IP classification for call control
signaling.
DSCP for Call Control
DSCP IP classification for any phone configuration transfer.DSCP for Configuration
DSCP IP classification for phone-based service.DSCP for Services
Security Information
Indicates whether the phone learns MAC addresses from Gratuitous ARP
responses.
GARP Enabled
Indicates whether access to phone web pages is enabled (Yes) or disabled
(No).
Web Access Enabled
Indicates whether the Settings menu on the phone is accessible.Settings Enabled
Indicates the security mode assigned to the phoneSecurity Mode
URL Information
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
199
Remote Monitoring
Network Setup Information