Cisco 7925G Administration Guide

DescriptionItem
Number of output datagrams discarded for reasons other than errors,
such as lack of buffer space
IpInOutDiscards
Number of output datagrams discarded because no route found to
transmit them to destination
IpInOutNoRoutes
Maximum number of seconds which received fragments are held while
awaiting reassembly
IpInReasmTimeout
Number of IP fragments received that need to be reassembledIpReasmReqds
Number of IP fragments successfully reassembledIpInReasmOKs
Number of IP fragment reassembly failuresIpInReasmFails
Number of IP datagrams that have been successfully fragmentedIpInFragOK
Number of IP datagrams that were discarded because they could not
be fragmented
IpInFragFails
Number of IP datagram fragments generatedIpInFragCreates
TCP Statistics
Determines timeout value used for retransmitting unacknowledged
octets
TcpRtoAlgorithm
Minimum value for retransmission timeout in millisecondsTcpRtoMin
Maximum value for retransmission timeout in millisecondsTcpRtoMax
Number limit for total TCP connections that are supported; if dynamic,
displays value of -1
TcpMaxConn
Number of times TCP connections made a transition to SYN-SENT
state from CLOSED state
TcpActiveOpens
Number of times TCP connections made a transition to SYN-RCVD
state from LISTEN state
TcpPassiveOpens
Number of times TCP connections made a transition to CLOSED state
from SYN-SENT or SYN-RCVD state, plus number of times
transitioned to LISTEN state from SYN-RCVD state
TcpAttemptFails
Number of times TCP connections made a transition to CLOSED state
from either ESTABLISHED or CLOSE-WAIT state
TcpEstablishResets
Number of times TCP connections for which the current state is either
ESTABLISHED or CLOSE-WAIT state
TcpCurrEstab
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
205
Remote Monitoring
Network Statistics Section

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g