EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #227 background imageLoading...
Page #227 background image
DescriptionItem
Number of RTP voice packets transmitted since voice stream was
opened
This number is not necessarily identical to the number of
RTP voice packets transmitted since the call began because
the call might have been placed on hold.
Note
Sender Packets
Type of audio encoding used for the stream: G.729, G.711 u-law,
G.711 A-law, or Lin16k
Sender Tool
Internal time stamp indicating when this streaming statistics report
was generated
Sender Report Time
Total number of octets received by the phoneReceiver Octets
Number of missing RTP packets (lost in transit)Receiver Lost Packets
Number of times this streaming statistics report has been accessed
from the web page (resets when the phone resets)
Receiver Reports
Voice Quality Metrics
Score that is an objective estimate of the mean opinion score (MOS)
for listening quality (LQK) that rates from 5 (excellent) to 1 (bad).
This score is based on audible concealment events due to frame loss
in the preceding 8-second interval of the voice stream.
The MOS LQK score can vary based on the type of codec
that the Cisco Unified IP Phone uses.
Note
MOS LQK
Lowest MOS LQK score observed from start of the voice streamMin MOS LQK
Version of the Cisco proprietary algorithm used to calculate MOS
LQK scores
MOS LQK Version
Ratio of concealment frames to speech frames in preceding 3-second
interval of active speech. If using voice activity detection (VAD), a
longer interval might be required to accumulate 3 seconds of active
speech
Interval Conceal Ratio
Number of seconds that have concealment events (lost frames) from
the start of the voice stream (includes severely concealed seconds)
Conceal Secs
Related Topics
Roaming and Voice Quality or Lost Connection Problems, on page 219
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
207
Remote Monitoring
Stream Statistics Menu

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals