Claas ROLLANT 240 User Manual

2.1.4 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Contents
Spring-loaded cylinder for bale-forming roller
drive – tailgate ............................................................... 14.3.5
Spring-loaded cylinder for the bottom bale-forming
roller drive ...................................................................... 14.3.5
Adjusting the spring-loaded cylinder for the front
bale-forming roller drive ................................................. 14.3.5
Adjustment of tension springs ........................................ 14.3.6
Adjusting the tension spring for the net roll tightening
clamp (Adjustment done without net roll) ....................... 14.3.6
Tension spring
(Adjustment done without net roll) ................................. 14.3.6
Adjusting the tension spring for the net brake ............... 14.3.7
Adjusting the pressure springs for the pressure roller ... 14.3.7
Adjusting the tightening device for the net knife ............ 14.3.7
Adjusting the twine tightener .......................................... 14.3.8
Adjusting the twine knife control .................................... 14.3.8
Lubrication system ............................................................... 14.4.1
Automatic chain lubrication ............................................ 14.4.1
Mechanical lubrication of the central chain
(Rollant 254/255 - Option) ............................................. 14.4.2
Overview of the mechanical lubricating pump ............... 14.4.2
Making adjustments to the mechanical
lubricating pump ............................................................ 14.4.2
....................................................................................... 14.4.2
Lubricant ........................................................................ 14.4.3
Bearings to be greased and main lubrication
installation (for ROLLANT 254/255 - optional) ............... 14.4.3
Automatic central lubrication of the bearing
(Rollant 254/255 - Option) ............................................. 14.4.4
Overview ........................................................................ 14.4.4
Adjusting the flow rate ................................................... 14.4.4
Setting the stop on the grease pump ............................. 14.4.5
Filling the grease container ............................................ 14.4.5
Cutting unit ........................................................................... 14.5.1
Adjusting the height of the cutting knives
(ROLLANT 250/254/255 RC) ......................................... 14.5.1
ROLLANT 254/255 - from 75400181/74802194 ............ 14.5.1
Hydraulic oil filter
(machine with filter system) ................................................. 14.6.1
Bleed valve combination with pressure limiting valve .... 14.6.2
Equipment ............................................................................ 14.7.1
Fire extinguisher (Rollant 254/255 optional) .................. 14.7.1
Clean the rollers (Rollant 254/255) ................................ 14.7.1
Tyres .................................................................................... 14.8.1
Check tight fit of wheel nuts ........................................... 14.8.1
Monitoring intervals ........................................................ 14.8.1
Procedure: ..................................................................... 14.8.1
Setting (locking) the bearing clearance ......................... 14.8.1
Proposals for winter storage ................................................ 14.9.1
15. Lubrication plan
Lubricants and notes ............................................................ 15.1.1
16. Index

Claas ROLLANT 240 Specifications

General

Brand	Claas
Model	ROLLANT 240
Category	Lawn and Garden Equipment
Language	English