Claas ROLLANT 240 - Control Box; Standard Operation; Control Panel (ROLLANT 254;255 Optional)

13.1.2 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
After using the baler
Control box
If the round baler is hitched, suspend the control box
(B) on the holder provided (H) behind the left screen.
(Fig. 4)
Standard operation
With the round baler unhitched hook the standard
control box (E) into holder (F) behind the right hand
screen, provided for this purpose.
(Fig. 5)
Control panel (ROLLANT 254/255 optional)
If the round baler is hitched, insert the control panel
(C) into the holder provided (D) behind the right
screen.
Note!
In order to prevent water from entering, the
control box or control terminal must be hung so
that the cable sockets are on the bottom.
When cleaning the baler with steam jets or high
pressure jets, always remove the control box or
panel beforehand.
(Fig. 6)
4
E
F
5
C
D
6