10.3.4 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Control Terminal
Engaging / disengaging automatic tailgate
operation
Attention!
For safety reasons, the automatic tailgate
operation must be reactivated every time
after the ignition is switched on or off or there
is an emergency cutoff.
When automatic tailgate operation is activated, the
tailgate will automatically open when the wrapping
cycle is complete. Status indicator (B) lights up.
Call up the “User settings” submenu.
Note!
The automatic wrapping unit is still active. The
tailgate can be opened manually by pressing the
relevant key ("Tailgate open").
Manual override of automatic tailgate operation
(Fig. 6, 7)
200407
B
6
7
Press the submenu key as many times as
needed until the function “Engage /
disengage automatic tailgate operation” is
active and symbol (10) lights up.
Press this key to engage automatic tailgate
operation – the box under symbol (10) is
marked and status display (B) lights up.
Press this key to engage automatic tailgate
operation – the box under symbol (10) is
empty and status display (B) goes off.
Press “open tailgate” to open the tailgate.
Press “close tailgate” after the bale has
been ejected.
The automatic mode continues to function.