Claas ROLLANT 240 User Manual

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 9.1.9
Operation
Activate manual net wrapping
Follow steps (1) to (6) to activate manual net wrapping.
If you go over the adjustable delay time (the light of
pushbutton switch (3) goes out), the baler changes to
the “manual net wrapping” operating mode.
1. Switch off the control box.
2. Press and hold pushbutton switches (3) and (4) at
the same time.
3. Switch on the control box.
4. Pushbutton switch (3) lights up for 10 seconds.
5. After the pushbutton switch light (3) has gone out,
release buttons (3) and (4).
6. Switch off the control box and then switch it back
on.
The baler is now operational and manual wrapping is
activated.
Set a delay time between 1 and 10 seconds to
reactivate automatic net wrapping.
(Fig. 11)
11

Claas ROLLANT 240 Specifications

General

Brand	Claas
Model	ROLLANT 240
Category	Lawn and Garden Equipment
Language	English