Claas ROLLANT 240 User Manual

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 4.1.1
Safety precautions
SAFETY PRECAUTIONS
For your safety, and those working with you, follow
these safety precautions and observe all safety
signs on the machine.
In order to provide a better view, certain
photographs or illustrations in this manual may
show an assembly with the safety shield removed.
However, a machine should never be operated in
this condition. Keep all shields in place. If shield
removal becomes necessary for repairs, replace
shield prior to machine operation!
Replace any Danger, Warning, Caution or
Instruction Safety signs that are missing or not
readable. Location of safety signs are indicated
within this manual.
Note!
The figure in () refers to the adjacent picture
and indicates the correct location of the
safety sign on the machine.
When parts are replaced that have safety signs,
make sure you install a new safety sign with each
new part.
Note!
New safety signs are available from your
CLAAS Dealer.
Attention!
Before using the machine read and
understand Operator’s Manual safety
messages!
Read and understand all safety signs on the
machine.
Learn and practice safe use of controls before
operating.
It is your responsibility to understand and follow
manufacturers instructions on machine operation,
service, and to observe pertinent laws and
regulations.
Operator Manuals may be obtained from your
CLAAS Dealer.
Personal injury may result if these safety
precautions are not followed
• MAKE SURE no person is allowed on any part
of the Baler when tractor is running.
• MAKE SURE all safety shields and covers are
installed properly when Baler is operating.
• MAKE SURE all bystanders are in a safe
position before starting the tractor or operating
Baler.
• MAKE SURE the pickup head is fully lowered
before any part of the hydraulic system is
disconnected.
• MAKE SURE no one is allowed under the
pickup head unless the pickup head is in
transport position and securely locked.
• MAKE SURE all safety shields on Baler are in
place and secured when any have been
removed for servicing, to make adjustments,
etc. Remember, these shields are provided for
the protection of those working on or around
the Baler.
• NEVER STAND in path of Baler while
operating.
• KEEP OUT of Baler compartment while
operating.
• BE SURE all hydraulic fittings are tightened
securely whenever they have been loosened or
disconnected. Replace all hoses which have
become frayed. Escaping hydraulic oil under
pressure can cause personal injury.
• If Baler hydraulic system is equipped with an
accumulator, accumulator shutoff valve must be
closed before: (a) any part of the hydraulic
system is loosened or is to be disconnected,
and (b) the Baler is to be transported for any
distance.
• TAKE NOTE that hydraulic fluid under pressure
escaping from a very small hole can be almost
invisible. Use a small piece of cardboard or
wood to search/check for possible leaks.
• NEVER use your hands to detect pressure
leaks.
• CONSULT A DOCTOR immediately if you
sustain an injury by escaping fluids. Serious
infection or reactions can develop if proper
medical treatment is not administered quickly.
• MAKE SURE all oil or grease is removed from
operator’s ladder and platform and other
access areas immediately if any is spilled.
Safety precautions

Claas ROLLANT 240 Specifications

General

Brand	Claas
Model	ROLLANT 240
Category	Lawn and Garden Equipment
Language	English