Claas ROLLANT 240 - Pre-Settings; Pick-Up Function; Pick-Up

000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 11.6.1
CLAAS COMMUNICATOR - operation
PRE-SETTINGS
Before starting work, the CLAAS COMMUNICATOR
should be set according to your needs: Type of
wrapping, automatic opening of tailgate, the use of
blades etc.
See »operator settings« (A), page 11.2.1, to carry out
the pre-settings.
(Fig. 1)
PICK-UP FUNCTION
Pick-up
The height of the pick-up can be set with the keys (B),
(C), (D) and (E). The height is set according to the
ground conditions.
Lift pick-up to end position
Lift the pick-up step by step
Lower pick-up step by step
Lower pick-up to end position; pick-up
oscillating: the pick-up adapts to the
height differences of the ground.
(Fig. 2)
A
1
B
C
D
E
2
CLAAS COMMUNICATOR - operation