16.1.2 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Index
Driving the baler with the roller crop guard ...................... 8.1.5
E
Electrical systems ............................................5.1.3, 7.3.1
Engage / disengage knives
....................................... 10.1.5
Engaging / disengaging automatic tailgate operation
....... 10.3.4
Engaging the drive for net wrapping
.............................. 8.2.8
Engaging the drive for the twine wrapping mechanism
.... 8.2.13
Engaging the knives
.................................................. 9.2.4
Equipment
............................................................ 14.7.1
Error display in text mode
......................................... 10.5.1
F
Fault display ...............................................10.5.1, 11.4.1
Fault menu
............................................................ 11.1.9
Faults, Cause or remedy
.......................................... 12.1.1
Feeder mechanisms
.................................................. 5.1.1
Filling the grease container
....................................... 14.4.5
Fire extinguisher (Rollant 254/255 optional)
.................. 14.7.1
Fitting the drive shaft with the CC taper lock
.................... 7.2.2
Flow rate of hydraulic oil
............................................. 5.1.3
Functions in the settings menu
................................... 11.1.7
Functions with set parameters
................................... 11.1.7
G
General notes on maintenance .................................. 14.1.1
Greasing the hitch eye
............................................... 7.2.5
H
Hydraulic baling pressure preadjustment ........................ 8.1.9
Hydraulic oil filter (machine with filter system)
................ 14.6.1
Hydraulic rotor reverse device
..................................... 6.1.2
Hydraulic rotor reverse device from tractor
..................... 6.1.2
Hydraulic system
...................................................... 5.1.3
Hydraulic system for standard machines
........................ 7.4.1
Hydraulic system of CLAAS Control Terminal models
....... 7.4.2
I
Image adjustment menu ........................................... 11.5.3
Important notes on maintenance
................................ 14.1.1
Incremental encoder
................................................ 11.1.4
Incremental encoder and keys
................................... 11.1.4
Information window in the application menu
.................. 11.1.7
Inserting the net
....................................................... 8.2.1
Installing and removing the knives
................................ 8.1.8
Installing the bale discharge
........................................ 7.6.1
Introduction
............................................................. 1.1.1
J
Jack stand .............................................................. 7.2.2
Job data
............................................................... 10.2.1
K
Knife - blanking knife holder (option) ............................. 8.1.8
Knife cleaning sequence
.......................................... 11.2.6
L
Ladder ................................................................. 8.1.11
Language selection menu
......................................... 11.5.7
Laying down the bales
............................................... 9.2.8
Locking the knives
.................................................... 8.1.8
Lubricant
.............................................................. 14.4.3
Lubricants and notes
............................................... 15.1.1
Lubricants table
...................................................... 14.2.2
Lubrication system
.................................................. 14.4.1
M
Machine serial number ............................................... 3.3.1
Machines with lighting equipment
................................. 7.3.2
Main menu
.................................................11.1.5, 11.1.8
Maintenance and lubricant tables
............................... 14.2.1
Maintenance table
................................................... 14.2.1
Making adjustments to the mechanical lubricating pump
.. 14.4.2
Making user settings
................................................ 10.3.2
Manual net wrapping
................................................. 9.1.3
Manual overload of the automatic wrapping
.................. 9.2.10
Manual override of automatic tailgate operation
............. 10.3.4
Manual override of automatic wrapping operation
............. 9.1.6
Manual wrapping - twine wrapping and net wrapping
...... 11.6.8
Mechanical lubrication of the central chain
(Rollant 254/255 - Option)
......................................... 14.4.2
Memory management menu
...................................... 11.5.5
N
Net wrapping ................................................8.2.1, 12.1.2
O
Open / close tailgate ................................................ 10.1.6
Opening the service menu
........................................ 11.5.1
Opening the tailgate manually
.................................... 11.6.9
Operator settings
.................................................... 11.2.1
Overview
................................................................ 9.2.5
Overview – CLAAS COMMUNICATOR
........................ 11.1.1
Overview – Claas Communicator
................................ 11.1.3
Overview of the mechanical lubricating pump
................ 14.4.2
P
Parking support ...................................................... 13.1.1
Personal injury
......................................................... 4.1.1
Pick-up
.............................................. 6.1.1, 8.1.1, 11.6.1
Pick-up crop guard
.................................................... 8.1.2
Pick-up function
...................................................... 11.6.1
Pick-up in float position / up
....................................... 10.1.5
Pick-up up / down (without floating position)
.................. 10.1.4
Pick-up, transport and work positions
............................ 8.1.1
Power supply
........................................................... 7.3.2
Preparing for transport
............................................... 4.1.5
Pre-settings
........................................................... 11.6.1
Propeller
............................................................... 13.1.3
Proposals for winter storage
...................................... 14.9.1
R
Ramp setting to signal bale ejection .............................. 7.6.5
Recharge pressure
.................................................. 10.3.5
Recommended warning lights
...................................... 4.1.5
Reel
....................................................................... 8.3.1
Removing the hydraulic hoses and cables
.................... 13.1.3
Required tractor hydraulics
......................................... 5.1.3
Reset daily counter
................................................. 10.4.2
Reset job
.............................................................. 10.4.4
Reset job (zero setting)
............................................ 11.3.1
Reset maintenance display
....................................... 10.4.2
Resetting the daily counter
........................................ 11.3.2
To Next Page
Loading...
Need help?
General
