11.1.2 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
CLAAS COMMUNICATOR
Switching on the Claas Communicator
Note!
Start the tractor and then switch on the CLAAS
COMMUNICATOR.
Press the On/Off-key (1).
The »application menu« is displayed.
Note!
When establishing a connection between the
Claas Communicator and the baler for the first
time, the menu configuration is transferred from
the Rollant 255. The download process may
take a few minutes. The configuration is saved
to the memory of the CLAAS
COMMUNICATOR. When the »application
menu« is displayed, the download process is
finished.
After switching the CLAAS COMMUNICATOR
on again, the menus are displayed after approx.
5 sec.
The CLAAS COMMUNICATOR has sufficient
memory for five machine configurations.
Note!
Never switch off the CLAAS COMMUNICATOR
when working. All control functions will then fail.
(Fig. 1)
1
1
To Next Page
Loading...
Need help?
General
