000 299 119 5 - BA ROLLANT 240 - 250 - 254 - 255 11.2.5
CLAAS COMMUNICATOR
Setting the recharging of the baling pressure
in the hydraulic cylinder
During bale wrapping, the pressure of the hydraulic
cylinders which keep the tailgate closed can be
recharged at regular intervals. This results in denser
bales. The function is carried out every 17.5 seconds.
Turn the incremental encoder (I),
until the »Recharging the baling
pressure in the hydraulic
cylinder« (H) appears surrounded
by a frame.
Press the incremental encoder to
confirm. The frame appears
enlarged.
Press the incremental encoder to
to activate (1) or to deactivate (0)
the recharging of the pressure of
the hydraulic cylinder.
Press the incremental encoder to confirm the new
status: it is saved in the CLAAS COMMUNICATOR.
The frame is reduced in size.
The recharging of the pressure of the hydraulic
cylinders is
(Fig. 7)
Note!
When the function »recharging the baling
pressure« is activated, it is only switched on
after the first bale. The key »recharging the
baling pressure« of the application menu is
displayed in a darker color when the function is
activated.
To activate the function before the first bale,
activate the key »recharging the baling
pressure« in the application menu. See chapter
»Operation«.
H
I
7
0 = deactivated 1 = activated
0
0