ID-DCU-MARINE-2.2.2, ©ComAp – June 2015 - 148 -
ID-DCU-MARINE-2.2.2.pdf
5. Configure comparator limits Input ON, Input OFF as PLC setpoints.
6. Edit setpoint name in PLC setpoints list.
Result looks like this
7. Drag & drop PLC functional block Ana Switch, configure Input 1 and Input 2 as PLC setpoints and edit
the setpoint names to RPM 1 and RPM 2.
8. Configure binary Input SW: PLC values: PLC Bout 1.1.
To Next Page
Loading...
