User's Manual
47
Figure 5-3 Enter password
Step 6 Configure the password information for admin.
Table 5-1 Password information
Parameter Description
User
By default, the user is
admin
.
Password
In the
Password
box, enter the password for admin.
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
Confirm Password
Prompt Hint
In the
Prompt Hint
box, enter the information that can remind you
of the password.
On the login interface, click , the prompt will display to help you
find back the password.
Step 7 Click
Next
.
Figure 5-4 Unlock pattern
Step 8 Draw an unlock pattern.
After the setting is completed, the
Password Protection
page is displayed.
To Next Page
Loading...
Need help?
General
