D-42
<For Windows Me/98/95>
1. Start up the host computer, and then insert the CD-ROM into the CD-ROM drive.
2. Turn on the printer.
3. Use a USB cable to connect the printer to the host computer.
4. In the “Install Hardware Device Drivers” dialog box, click the [Next] button, select
“Search for a suitable driver for my device (recommended)”, and then click the [Next]
button again.
5. Select “Specify a location”, and then click the [Browse...] button.
6. Specify “\Corresponding_language\Win9X” on the CD-ROM, and then click the [OK]
button.
7. Click the [OK] button, and then continue following the instructions in the dialog boxes
that appear until the “Completing the Found New Hardware Wizard” dialog box
appears.
8. Click the [Finish] button.
9. When the “Found New Hardware Wizard” dialog box appears again, repeat steps 4
through 8 to install all drivers.
To Next Page
Loading...
