Develop D 16G - Factory Test

S-22
(7) Factory Test
• Operation tests can be performed during manufacturing.
(8) Clear Data
• Each type of data can be cleared.
Function Purpose Setting Details/Precautions
PANEL BUZZER
TEST
To check the operation of the display and all indicators and buttons.
RAM TEST To test reading and writing of the memory.
Function Purpose Setting Details/Precautions
MEMORY CLEAR
To clear the settings for the func-
tions listed at the right and return
the functions to their default set-
tings.
• All functions of the Utility
mode
• All functions in the “Services
Choice” menu of the Service
mode
• All functions in the “ADJUST”
menu of the Service mode
(except “SERIAL NO.”,
“CUSTOMER ID” and “TC
TYPE”)
• All “FIXED ZOOM” settings in
the Service mode
• All Security mode settings in
the Service mode
NOTE
• After the “MEMORY CLEAR”
function is performed, turn
the machine off, then on
again.
PM COUNTER To clear the PM COUNTER value.
I/C COUNTER To clear the I/C COUNTER value.
APPLICATION
COUNTER
To clear the APPLICATION COUNTER value.
SCAN COUNTER To clear the SCAN COUNTER value.
PRINTER JAM
COUNTER
To clear the PRINTER JAM COUNTER value.
ADF JAM
COUNTER
To clear the ADF JAM COUNTER value.
TROUBLE
COUNTER
To clear the TROUBLE COUNTER value.