Develop D 16G - GENERAL; Printer Specifications

G-1
1. SPECIFICATIONS
(1) Main Unit
Copy Medium
NOTE
The dimension for Tray2 is fixed at A4L or Letter L.
Type
Original scanning system
Photoconductor type
Copying system
Resolution
Paper feed-in system
Exposure system
Developing system
Drum-charging system
Image transfer system
Paper separation system
Fusing system
Max. Original size
:
:
:
:
:
:
:
:
:
:
:
:
:
Desktop
Scanning in main scanning direction with a 3-line color CCD
sensor, and scanning in sub-scanning direction with unit
scanning and sheet feed-through system
OPC (Organic Photoconductor)
Electrostatic dry Powdered image transfer to plain paper with
laser
600 dpi × 600 dpi, 600 dpi × 300 dpi
2-Way system (Tray1 and Bypass Tray)
*3-Way system is possible if optional PF-125 (Tray2) is
installed.
Unit scanning slit exposure
FMT single component developing
Rotating brush with pre-charge film
Roller transfer
Curvature separation + Charge Neutralizing needle
Heat roller
Up to Legal size
Paper source Tray1 Tray2 Bypass Tray
Typ e
Plain paper (60 to 90 g/m
2
)
(16 to 24 lb.)
❍❍❍
Recycled paper (60 to 90 g/m
2
)
(16 to 24 lb.)
❍❍❍
Special paper (91 to 163 g/m
2
)
(24 to 43 lb.)
❍ – ❍
Transparencies ❍ – ❍
Label sheets ❍ – ❍
Envelopes ❍ – ❍
Dimension
Maximum (width × length) 216×356 mm
A4 L, Letter L
216×356 mm
Minimum (width × length) 105×148 mm 105×148 mm