S-23
5. SECURITY MODE
• This mode is used to set various security functions.
5-1. Security Mode Function Tree
5-2. Security Mode Setting Procedure
NOTE
• Be sure to keep the access procedure for the Security mode from any unauthorized per-
sons not involved with service operations.
<Procedure>
1. Display the Service mode screen.
☞ S-11
2. Press the Stop key, then the 9 key.
3. The Security mode screen appears.
<Exiting Procedure>
• Press the Panel Reset key.
(1) Security
Function Purpose Setting Details/Precautions
MACHINE
COUNTER
To enable or disable copying
depending on whether or not the
Mechanical Counter is installed.
• The default setting is
“ENABLE”.
ENABLE DISABLE
NOTE
• If “ENABLE” is selected,
copying is possible even if
the Mechanical Counter is
not installed.
SECURITY
MACHINE COUNTER
To Next Page
Loading...
