Develop D 16G - Page 125

S-7
4
DENSITY
(BOOK)
To specify the scanning density
when using the Original Glass.
• The default setting is
“MODE1”.
• MODE1:
For printing copies with the
same density as the docu-
ment
• MODE2:
For a lighter copy density in
order to reduce the appear-
ance of spots in copies
5
PRINT
DENSITY
To specify the default print density. • The default setting is “0”.
The setting range is -3 to +3.
6
LCD CON-
TRAST
To specify the brightness of the
display.
• The default setting is “0”.
The setting range is -1 to +2.
7LANGUAGE
To specify the language of
screens.
• The default setting is
“ENGLISH”.
• The language settings are
divided into Type 1 and Type
2. The Type 1 languages are
the standard.
<Available Languages>
Type1
ENGLISH GERMAN
FRENCH ITALIAN
DANISH DUTCH
SPANISH NORWEGIAN
SWEDISH FINNISH
TURKISH PORTUGUESE
Type2
ENGLISH GERMAN
FRENCH CZECH
HUNGARIAN POLISH
ROMANIAN LITHUANIAN
SLOVAKIAN
8
LAMP OFF
TIME
To specify the time until the Expo-
sure Lamp goes off.
• The default setting is
“MODE1”.
• MODE1:
When four hours have
passed since the last opera-
tion was performed
• MODE2:
When the machine enters
Energy Save mode
No. Function Purpose Setting Details/Precautions