Develop D 16G - Page 138

S-20
COPY ADF GLASS
AREA
To check for dirt in the scanning
section of the Automatic Document
Feeder.
✽ If spots appear in the copies
<Procedure>
1. Load A4 L or Letter L paper
into Tray1.
2. Press the Start key to start
the “COPY ADF GLASS
AREA” function.
3. Two copy samples are fed
out.
4. Check that no spots appear
in the copy samples.
5. Press the Stop key to stop
the “COPY ADF GLASS
AREA” function.
CCD MOVE TO
HOME
To move the scanner to its home
position in order to secure the
scanner.
✽ When transporting the machine
NOTE
• When transporting the
machine, be sure to move the
scanner to its home position
and secure it with the stopper
at the bottom left of the IR.
SCAN TEST
To check the lighting of the Expo-
sure Lamp and the movement of
the scanner.
✽ If the scanner malfunctions
<Procedure>
1. Press the Start key to begin
the scanner test.
2. Press the Stop key to stop
the scanner test.
Function Purpose Setting Details/Precautions