ECG SETUP MENU
VF8 DELTA/DELTA XL/KAPPA 8-19
The Lead Setup submenu
This submenu allows you to configure the following functions.
ECG
Channels
Determines the number and
format of displayed ECG
waveforms
NOTE: The TruST 12-lead
derived leads cannot be
displayed as ECG1 or ECG2.
They can only be displayed in
the Show All Leads view.
• ECG1 – displays the primary ECG signal.
• ECG1 & 2 – displays two ECG signals.
• ECG1 & 2 & 3 – displays three ECG channels.
• Cascade – cascades ECG1 data into the
second channel.
Channel 1
Channel 2
Channel 3
Selects leads for continuous
display in ECG channel(s) on
the main screen.
Channel 1, Channel 2, Channel 3 (scroll
through the list of available leads and click to
select for display).
NOTE: The Cable Type setting determines the
list of available leads for selection.
12 Lead
Position
Configures monitor for Standard
or Frank 12-lead monitoring (see
page 8-13 for more information).
•Standard – configures the monitor for
standard 12-lead monitoring.
•Frank – configures the monitor for Frank
12-lead format.
Menu
Selection
Description Available Settings
To Next Page
Loading...
