C-6 DELTA/DELTA XL/KAPPA VF8
C A
PPROVED OPTIONS AND ACCESSORIES
Network Patch Cables
R50 Recorders and Recorder Cables
External Device Interface
NOTE: The Infinity network patch cables are not recommended for connecting the
MIB II protocol converter to the IDS or the Infinity Kappa monitor. The recommended
patch cables can be found under the section entitled “External Device Interface” on
page C-6.
Patch cable, 1.2 m
Shielded cable to connect the IDS or a monitor to a net-
work wallplate
4726373
Patch cable, 2.4 m
Shielded cable to connect the IDS or a monitorto a network
wallplate
4726381
Patch cable, 4.9 m
Shielded cable to connect the IDS or a monitor to a net-
work wallplate
4726399
Patch cable, 20 m
Shielded cable to connect the IDS or a monitor to a net-
work wallplate; comes with extra connector for field termi-
nation
4725557
R50 recorder (includes paper) 5952630
R50-N recorder (includes paper and a mounting plate) 5740068
Recording paper, 10 rolls 4711201
R50 recorder cables, IDS-interface plate, 1.5 m
Cable to connect an R50 Recorder to the IDS
(requires interface plate)
4721770
Recorder cable, IDS-R50, 3 m
Cable to connect an R50 recorder to a IDS
(interface plate not required)
4313560
Recorder cable, 0.6 m
Cable to connect an R50 recorder to a monitor equipped
with an interface plate
4313586
MIB II protocol converter 7256931
MIB connection cable, 3 m
Cable to connect the MIB protocol converter to an IDS
5589093
MIB cable, Abbott Oximetrix
3
5742981
MIB cable, Abbott Q2/Q2+ Continuous Cardiac Output/SvO
2
7493344
MIB cable, AVL Opti CCA 5742999
To Next Page
Loading...
